HP MSA 2050 remove disk group and vdrain
Hello!I have 3 disk groups on my MSA 2050 and going to remove 1 group. I do it by the way that described in manual and VDRAIN process starts. So, all data from removing disk group not going to be...
View ArticleResetting the password on MSA1050
Hello,I have tried RESETUSER and RESTOREDEFAULTS logins with the SN on the controllers but the login does not work. Has anyone been able to sucessfully do this on an MSA1050?Thanks!
View ArticleClik here to view.
There is a problem with a FRU
I have this error is one of my P2000 G3 Sans and for the life of me I cant find a resolution. Anyone have any insights.
View ArticleHPE P2000 G3 MSA Arrays
Hi, I just want to verify that I have upgraded to firmware TS252P001.It does not say that TLSv1.0 is disabled.How can I check if the following is disabled in the firmware?Is there any methods to go...
View ArticleMove a MSA P2000 G3 to a different datacenter/network??
We have an MSA P2000 G3 iSCSI SAN that I want to move into a different datacenter network. What is the best, easiest way to go about this??e.g. the current management network is 172.23.0.xxx and the...
View ArticleMSA2312I expand volume
Hi! We have a MSA2312i with a RAID 5 (5 disk SAS + 1 SPARE) . These disks were of 300Gb , we have replaced them with new disks 600Gb (1 disk for time) and we want to know if we can expand the...
View Articlemsa 1050 disk group quarentined
good! I have a serious problem with a 1050 msa. I've been with the cabin down all day because of a problem with the disk group created. It appears to me in quarentena after a possible failure with the...
View ArticleDisable the SSH server from supporting SSH1 client for HP StorageWorks MSA2324fc
Hello,For a need to fix a vulnerability, I am looking for a command to disable the SSH server from supporting SSH1 clients.I found on the internet a command "undo ssh server compatible-ssh1x" but it...
View ArticleHP Gen9 RAID 6 to RAID 5 Migration
Hi ExpertsI have a HP Gen 9 server ( Live server of the client and not the test system ) .. accidently one of the logical group in that server was setup in RAID 6 and we wanted it to be in RAID 5....
View ArticleMSA 2040 SAS Controller to another unit as a replacement
Afternoon Folks,Im looking at two separate MSA 2040 SAS based dual controller systems(12G SAS) (one is in production and the other is decomissioned)We have seen a controller fail on the production unit...
View ArticleDifferences between BK829A / BK829B
Hello,Please explain the differences between two identical controllers:BK829A HP MSA P2000 four ports 1Gb iSCSI ControllerBK829B HP MSA P2000 four ports 1Gb iSCSI ControllerIs it possible to use them...
View ArticleDisable the SSH server from supporting SSH1 client for HPE StorageWorks...
Hello,For a need to fix a vulnerability, I am looking for a command to disable the SSH server from supporting SSH1 clients.I found on the internet a command "undo ssh server compatible-ssh1x" but it...
View ArticleHELP, Replacement P2000 G3 Smart Array messed up Firmware!
We have a P2000 G3 Smart Array controler (A) that errored after a power cut with (Degraded). The Network was dropping in and out.We could still get in by Controller (B) I restarted/reseated the...
View ArticleDisk Performance - VMWARE 6.7, MSA2040 SAS and software iSCSI
Hi There,Is anyone else out there using a HPE c7000 and MSA 2040 in a software iSCSI implmentation (I have two HPE 5700 switches providing the storage network). One 10GB connection (with a standby) to...
View ArticleMSA 2040 - Understanding Volume Tiering
Hi ThereI've been reading the best practice guide for the 2040 and I'm stumped by volume tiering.The document seems to be suggesting that "busy" data will "AUTOMATICALLY" move to volumes with a higher...
View ArticleHP MSA 2040 Seperating VMDK storage from NSA (iSCSI) storage
Hi,I present storage from my 2040 to my esxi hosts - they then mount it as a datastore. I then build VMs on that datastore. The local disks on that datastore are vmdk local storage. (For example the C:...
View ArticleHPE MSA 2052 remote replication
Hello,I am a newbie to replication technolgies with HPE MSA 2052s. We are replacing 2 * P2000 arrays in remote geographical locations linked over a WAN connection. I am testing this set up at present...
View ArticleClik here to view.
Create 2 volume msa 2050
hi guysi have msa 2050 i connected 2 port to my server as backup and redundant,when i create volume and map it to injector in my windows server i see 2 voulme created.one online and one offline.so...
View ArticleP2000 MSA G3 Controller B network degraded (but still seems to be working)
Hi all, I've got an odd issue on an old P2000 G3 MSA storage system. It has 2 controllers both of which are working fine and a number of expansion units (again all working as expected). I...
View Article